- AFDX/ARINC 664 P7
- DNP3 Master
- DNP3 Slave
- EtherCAT Master
- EtherCAT Slave
- IEC 60870-5-104 Slave
- IEC 61850-8-1 MMS Server
- IEC 61850-8-1 GOOSE
- IEC 61850-9-2 Sampled Values
- IEC 62056 Master
- IEEE C37.118 Master
- IEEE C37.118 Slave
- Modbus Master
- Modbus Slave
- OPC UA/DA
- Precision Timing
Our Approach to Communication Protocols
OPAL-RT's Real-Time Simulator architecture is designed to leverage standard Commercial Off-the-Shelf components to reduce system cost and increase flexibility for our users.
It is for this reason that most communication protocol software drivers are developed to run directly on a simulator's CPU(s) without the need for additional hardware. This means that many drivers are easily activated via software license for our RT-LAB and HYPERSIM simulation platforms.
An array of add-on modules specifically selected for their Hardware-in-the-Loop (HIL) capabilities are available for protocols that require specialized hardware, such as in the Automotive and Aerospace industries. Additional add-on modules are available to further expand functionality, such as additional ethernet ports or precision time synchronization, which can be installed simply and easily, just like with a desktop computer.
To learn more about, which products are required to use a specific Communication Protocol driver, please view that driver's page from the list above.
© OPAL-RT Technologies Inc., 2022. All rights reserved.
The software described in this document is furnished under a license agreement. The software may be used or copied only under the terms of the license agreement. This documentation contains proprietary information of OPAL-RT Technologies Inc. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, recording or otherwise, without prior written permission of Opal-RT.
The information in this document was prepared by Opal-RT with all reasonable care, and is believed to be accurate. However, Opal-RT does not assume responsibility for losses or damages resulting from any omissions, inaccuracies, or errors contained herein. This documentation is subject to change, and revisions or new editions may be issued to incorporate such changes.
RT-LAB, DINAMO, TestDrive, RT-EVENTS, ARTEMIS and Test Manager are trademarks of Opal-RT Technologies, Inc. MATLAB, Simulink and Real-Time Workshop are trademarks of The Mathworks, Inc. LabVIEW is a trademark of National Instruments, Inc. QNX is a trademark of QNX Software Systems Ltd. All other brand and product names are trademarks or service marks of their respective holders © 2021 Opal-RT Technologies Inc. All rights reserved.