Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Quick Nav

Have a question or need help? 

email Get in touch


Solution

The IEC 62056 communication protocol is supported via use of an external gateway. The gateway is used to establish the communication with the IEC 62056 slave using DNP3 master on the simulator side and DNP3 slave on the gateway side. One or multiple IEC 62056 slaves (which are typically smart meters) can report analog and digital measurements to the simulator through the gateway. The gateway will receive data from the IEC 62046 slave(s) and retransmit this data to the simulator using DNP3. The equipment used to perform the protocol conversion is the SMP 4/DP gateway made by Eaton. The equipment comes with a configuration software (SMP Manager) that is used to configure protocols involved in the communication chain. Documentation from the gateway manufacturer can be found here. Contact us for more information on this approach.
IEC 62056 is a set of standards for electricity metering data exchange by International Electrotechnical Commission. The IEC 62056 standards are the international standard versions of the DLMS/COSEM specification.


Platform Compatibility

Documentation

document HYPERSIM


Product Selection Guide

For this solution, please contact us for more information and pricing.

To create a IEC 62056 Master connection a Gateway and the OPAL-RT DNP3 Master driver (OP3232) required. Since the Gateway connects to the Real-Time Simulator via ethernet interface (RJ-45), if additional interfaces are required in the simulator then a physical ethernet port add-on module will need to be added (see OP3821 and I350T4V2BLK).

TypeProduct Number(s)OptionalDescriptionSimulator CompatibilityAdditional requirement(s)
OP4510-seriesOP5600-seriesOP5700-seriesOP5000-series
External HardwareNot available


Eaton SMP 4/DP Gateway. Contact us for more information.


Software

OP3232


Driver - DNP3 Master communication protocol for exchange of data between master stations and RTU and IED - 50 data points included. Additional data points may be added with the OP3050 product.



Add-on moduleOP3821

Dual-port PCI-E X1 Gigabit Ethernet Kit for OP4510 Real-Time Simulators. Can be added if more physical ethernet ports are required.




OP4510 with unused PCIe slot
Add-on moduleI350T4V2BLK

Intel I350T4V2 Quad Port Ethernet Server Adapter 10/100/1000 Mbps. Can be added if more physical ethernet ports are required.

OP5600-series, OP5700-Series, OP5000-series with available PCIe slot
  • No labels