Skip to main content
Skip to breadcrumbs
Skip to header menu
Skip to action menu
Skip to quick search

Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

1.6 Setting Default Values for the Sinewave Generators

Created by OPAL-RT Publisher, last modified on Jun 16, 2021

Next, we can configure the signal generators used in the simulation.

In the Configuration Tree, expand Circuit Model >> SPWM Generators
Configure the SPWM Generators by confirming that the Default Values of the relevant channels are configured as shown in the table below.
Click Save.

	Channel Name	Default Value
Frequency Engines
	Frequency Engine 0	0Hz
SWG 0
	Channel Name	Default Value
	Amplitude	100
	Frequency Engine	0
	Phase	0º
SWG 1
	Channel Name	Default Value
	Amplitude	100
	Frequency Engine	0
	Phase	120º
SWG 2
	Channel Name	Default Value
	Amplitude	100
	Frequency Engine	0
	Phase	-120º

No labels