Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Sinewave Generators

Next, we can configure the signal generators used in the simulation.

  • In the Configuration Tree, expand Circuit Model >> SPWM Generators 
  • Configure the SPWM Generators by confirming that the Default Values of the relevant channels are configured as shown in the table below.
  • Click Save.


Frequency Engines

Channel Name

Default Value


Frequency Engine 0

0Hz
SWG 0

Channel Name

Default Value


Frequency Engine0

Phase0º
SWG 1

Channel NameDefault Value

Frequency Engine0

Phase120º
SWG 2

Channel NameDefault Value

Frequency Engine0

Phase-120º

SPWM Generators

Next, we can configure the SPWM Generators used in the simulation.

  • In the Configuration Tree, expand Circuit Model >> SPWM Generators 
  • Configure the SPWM Generators by confirming that the Default Values of the relevant channels are configured as shown in the table below.
  • Click Save.


SPWM Carrier

Channel Name

Default Value


Carrier Frequency

5000Hz
SPWM Generator 0

Channel Name

Default Value


Frequency Engine0

Phase0º
SPWM Generator 1

Channel NameDefault Value

Frequency Engine0

Phase120º
SPWM Generator 2

Channel NameDefault Value

Frequency Engine0

Phase-120º


  • No labels