This configuration requires the following FPGA boards. Please refer to the linked product page for additional information.
The PXIe-7868R supports the following features:
6 CH, 1MS\s, 16-bit, +/- 10V Input Signal Range, Differential
Tunable Gain, Offset, and Min/Max Saturation
18 CH, 1MS\s, 16-bit
User-defined mapping to Analog Outputs available with tunable Gain, Offset, and Min/Max Saturation.
|Digital Input||16 CH, 80MHz, 3.3V TTL (Connector 1)|
32 CH Total:
User-defined mapping to Digital Outputs available with tunable Polarity.
Refer to 7868 IO Assignation [eHSx32_Dual_PMSM_VDQ_IO_32DO_7868R] to see the IO assignment.
This configuration includes a pre-compiled firmware/bitfile which contains the following features:
1x eHSx32 Solver
User-defined mapping to Circuit Sources available:
User-defined mapping to Circuit Switches available:
|2x PMSM Variable Parameter Solver|
Each machine supports two modes: Constant Parameter and Variable Parameter. In constant parameter mode, Ld, Lq, and flux is constant. In variable parameter mode, a user can configure the solver to such that Ld, Lq, and flux varies according to Id and Iq.
Refer to the PMSM BLDC Section for more information.
Excitation assignable to any analog input port
|1x Encoder/motor||Assignable to any DO port|
|1x Hall Effect Sensor/motor||Assignable to any DO port|
|32x Sinewave Generators|
|16x PWM Generators|
|12x Sinusoidal PWM Generators|
|Analog Output Mapping and Rescaling|
|Analog Input Rescaling|
|32x Waveform Acquisition Channels|