Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

OP4610XG Standard Configuration


A. DB37 connectors for digital or analog inputs and outputs.

B. In the standard OP4610XG configuration, this section contains a DB9 connector module for RS422 signals typically used to transmit differential encoder inputs and outputs; however, other options are available.

C. Standard computer connectors (from left to right):

  • 1 VGA Port
  • 1 Serial Port (COM1)
  • 2 1G LAN RJ-45 Ports
  • 1 IPMI LAN RJ-45 Port
  • 2 USB 3.2 Gen 2 Ports
  • 1 HDMI Port
  • 2 10G LAN RJ-45 Ports
  • Unit Identifier (UID) switch

D.  2 PCIe free slots are available for optional I/O card. See OP4610XG PCIe optional I/O cards below.

OP4610XG I/O Expansion Options 

The OP4610XG comes with an RS-422 Connector Kit (OP5969-1) factory installed by default.

The optional Fiber-Optic Connector Kit (OP5969-2) can also be installed. It will replace the default connector kit, since only ONE of these connector kits can be installed in an OP4610XG at a time.

The optional connector kit must be selected at the time of purchase and factory-installed.


RS422 Connector kit
(OP5969-1)

OP4510 V2-1 RS422 Connectors

DEFAULT connector kit installed
The DB9 connectors for RS422 signals are typically used to transmit differential encoder inputs and outputs. Refer to the OP5969-1 User Manual for specifications and pin assignment.

Fiber-Optic Connector kit
(OP5969-2)

OP4510 V2-2 Fiber Optic Connectors

Optional connector kit
Fiber-optic connector kit provides 6 RX and 6 TX channels.
These channels can be used as digital I/Os or for low-speed communication protocols.
The ORION protocol, developed by OPAL-RT is compatible with these channels and available in custom bitstreams. Refer to the OP5969-2 User Manual for specifications and pin assignment.

OP4610XG PCIe Optional I/O cards

The following PCIe options are available for the OP4610XG:

  • Up to 2 expansion kits may be installed in an OP4610XG if OP5451, OP3411 or OP3821 is chosen by the client.
  • Only 1 expansion kit may be installed in an OP4610XG  if OP3811 or OP3812 is chosen by the client.

NOTE: PCIe optional cards must be selected at the time of purchase and factory-installed.


OP5451
Copper cable


Passive/active PCIe expansion with standard PCIe iPass x4 connector interface. This option is used to connect the OP4610XG to an OPAL-RT expansion I/O chassis. The option comes as a kit including a copper cable.

OptionPlatformType of cable
OP5451

OP4610XG to OP4520
OP4610XG to OP5607
OP4610XG to OP5705-IO
OP4610XG to OP5707-IO

Copper cable, 2 m (6 ft)

OP3411

OP3411

CANbus protocol expansion board with a CANbus standard 25-pin connector interface.

OP3811

OP3811

GPS time synchronization (IEEE 1588) with RJ45 connector interface and expansion connector plate with external synchronization input connectors and Fiber-optic synchronization output.

OP3812

OP3812

GPS time synchronization (IEEE 1588) with SFP connector interface and expansion connector plate with external synchronization input connector and Fiber-optic synchronization output.

OP3821

OP3821_Ethernet_Backplate

Dual-port PCIe x1 Gigabit Ethernet interface.

OP4610XG Standard Configuration


A. DB37 connectors for digital or analog inputs and outputs.

B. In the standard OP4610XG configuration, this section contains a DB9 connector module for RS422 signals typically used to transmit differential encoder inputs and outputs; however, other options are available.

C. Standard computer connectors (from left to right):

  • 1 VGA Port
  • 1 Serial Port (COM1)
  • 2 1G LAN RJ-45 Ports
  • 1 IPMI LAN RJ-45 Port
  • 2 USB 3.2 Gen 2 Ports
  • 1 HDMI Port
  • 2 10G LAN RJ-45 Ports
  • Unit Identifier (UID) switch

D.  2 PCIe free slots are available for optional I/O card. See OP4610XG PCIe optional I/O cards below.

OP4610XG I/O Expansion Options 

The OP4610XG comes with an RS-422 Connector Kit (OP5969-1) factory installed by default.

The optional Fiber-Optic Connector Kit (OP5969-2) can also be installed. It will replace the default connector kit, since only ONE of these connector kits can be installed in an OP4610XG at a time.

The optional connector kit must be selected at the time of purchase and factory-installed.


RS422 Connector kit
(OP5969-1)

OP4510 V2-1 RS422 Connectors

DEFAULT connector kit installed
The DB9 connectors for RS422 signals are typically used to transmit differential encoder inputs and outputs. Refer to the OP5969-1 User Manual for specifications and pin assignment.

Fiber-Optic Connector kit
(OP5969-2)

OP4510 V2-2 Fiber Optic Connectors

Optional connector kit
Fiber-optic connector kit provides 6 RX and 6 TX channels.
These channels can be used as digital I/Os or for low-speed communication protocols.
The ORION protocol, developed by OPAL-RT is compatible with these channels and available in custom bitstreams. Refer to the OP5969-2 User Manual for specifications and pin assignment.

OP4610XG PCIe Optional I/O cards

There are several PCIe options available for the OP4610XG:

NOTE that only TWO of these expansion kits may be installed in an OP4610XG at a time.

NOTE: PCIe optional cards must be selected at the time of purchase and factory-installed.


OP5451
Copper cable


Passive/active PCIe expansion with standard PCIe iPass x4 connector interface. This option is used to connect the OP4610XG to an OPAL-RT expansion I/O chassis. The option comes as a kit including a copper cable.

OptionPlatformType of cable
OP5451

OP4610XG to OP4520
OP4610XG to OP5607
OP4610XG to OP5705-IO
OP4610XG to OP5707-IO

Copper cable, 2 m (6 ft)

OP3411

OP3411

CANbus protocol expansion board with a CANbus standard 25-pin connector interface.

OP3811

OP3811

GPS time synchronization (IEEE 1588) with RJ45 connector interface and expansion connector plate with external synchronization input connectors and Fiber-optic synchronization output.

OP3812

OP3812

GPS time synchronization (IEEE 1588) with SFP connector interface and expansion connector plate with external synchronization input connector and Fiber-optic synchronization output.

OP3821

OP3821_Ethernet_Backplate

Dual-port PCIe x1 Gigabit Ethernet interface.
  • No labels