Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Description

The OP5966 is an RTSI converter module that converts synchronization signals from copper to fiber optic.

Added to a standard rack (using an optional clip) or mounted on a desktop, it allows users to switch from copper cable connection to fiber optic.

The change to fiber optic cables means that longer cable lengths (30 m) can be used without affecting signal quality.

Because the repeater acts as a link, it must be used at each end of the extension cable.

Features

The OP5966 chassis has two separate sections for input and output connectors:

IN

AUX SOURCE

fiber optic signal input from source (master) connected to OP5966.
MAIN SOURCECopper RTSI signal input from simulator source (master).
OUT
CURTSI copper signal output to target simulator (slave).
FBfiber optic signal output to OP5966.

Module installation


Specifications

Product name

OP5966 RTSI Signal Converter Module

Dimensions (HxWxD)

3.63 x 12.14 x 12.58 cm (1.324” x 4.78” x 4.954”)
I/O connector3.5mm stereo jack
POF fiber optic

Operating temperature

10 to 40 ºC (50 to 104ºF)

Relative humidity

10 to 90%, non condensing

Maximum altitude

2,000 m (6562 ft.)
  • No labels