The front section contains the carrier boards and conditioning modules with connectors for monitoring and the rear section contains conditioning boards for connections from the unit under test.
*The OP7161 and OP7461 boards are the core of the OP7000 and are not optional. Consult your sales representative for the complete list of available signal conditioning boards.
Boards used in the back of the unit must correspond to the type of boards used in the front.
Example: if an Analog Outboard is used in front slot #1, then a matching Analog outboard must be used in the rear slot #1.
OP7000 I/O Board Type Pairings
Universal Carrier with OP5330 or OP5340 mezzanine card.
Required for use of back analog IO cards
OP7000_6U_AIO_Carrier_DB37 for Type E Modules (Max of 4 modules per carrier)
|OP7353 Front Monitoring Interface|
OP7816 - 2
OP7000 Rear Opto-Isolated Digital Input: 16-Din DB37 connector
OP7817 - 2
OP7000 Rear Opto-Isolated 16-Dout, Push-Pull 5V to 30V, DB37 connector
OP7000 Rear 8TX and 8RX DC to 50 MBd Fiber Optic link, 650nm
OP7000_Rear_16Dout_SSR_250V_200mA (Normally Open Relay)
OP7000 Rear 16RX DC to 50 MBd Fiber Optic link, 650nm
OP7000 Rear_16TX_DC_to_50_MBd_Fiber_ Optic_link_650nm