Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

The OP7811 is designed to provide, at the back of the chassis, a direct link to the 16 analog input or output channels managed, in the front of the chassis, by an OP7220 and an OP5330 or OP5340 mezzanine.

Board Layout 

This card does not perform any processing or conditioning of the signals and is thus just a pass-through expansion of these signals in order to make them available on a DB37F connector on its front plate.

OP7811 passthrough module

Installation

The OP7811 Pass-through module must be inserted at the back of the OP7000 simulator, in the odd-numbered slot corresponding to the front slot where the OP7220 is installed. See page OP7000V2 Adding or Replacing Boards for more details (the same applies to the OP7000 chassis).

Make sure that the board is properly aligned using the guide tracks before pressing the module into place.

Front plate

The front plate holds one DB37F connector which gives access the 16 analog signals.

DB37F Connector Pins Assignment

DB37

Connector

Channel

DB37

Connector

Channel


1

+IN00

20

-IN00

Pin Assignments

2

+IN01

21

-IN01

3

+IN02

22

-IN02

4

+IN03

23

-IN03

5

+IN04

24

-IN04

6

+IN05

25

-IN05

7

+IN06

26

-IN06

8

+IN07

27

-IN07

9

+IN08

28

-IN08

10

+IN09

29

-IN09

11

+IN10

30

-IN10

12

+IN11

31

-IN11

13

+IN12

32

-IN12

14

+IN13

33

-IN13

15

+IN14

34

-IN14

16

+IN15

35

-IN15

17


36


18


37


19

Specifications

Product name

OP7811

Part number

126-0401

Product type

OP7000 back passthrough board

Number of channels

16

Dimensions

18.8 x 16.4 cm (7.4 in x 6.46 in)

I/O connector

DB37F (in from client side) per board

Operating temperature

10 to 40 ºC (50 to 104ºF)

Storage temperature

-55 to 85ºC (-67 to 185ºF)

Relative humidity

10 to 90%, non condensing

Maximum altitude

2,000 m (6562 ft.)

  • No labels