Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Configuration

If the target application requires specific adaptation of the OP8320 module option selected, in order to access the channel sockets, simply unscrew the four screws installed at the back of the housing (the side without a label) to remove the back cover and expose the sockets.

Open OP8320 Housing

Installation

The OP8320 was designed to be inserted between the OPAL-RT simulator and the unit under test. The DB37 cables at both ends of the module can be securely attached by removing the back cover as explained above and using the DB37 connector screws.


  • No labels