General
| Product Name | OP8910 |
|---|---|
| Part Numbers | see OP8910 configurations options |
| Board Type | Digital input/output conditioning |
| Form Factor | SLSC |
| SLSC Module Design Specifications | Version 1.2.1 |
| SLSC Compliance Level | 1 |
| Rear I/O Compatibility | [01] (Digital Input/Output up to 32 channels) |
| Hot-Plug support | No |
Characteristics
| Number of channels | 32 input or output channels Number of input /outputs depend on assembly selected. See OP8910 configurations options |
|---|---|
| Max peak current with FIU | 1A, see OP8900 SLSC Boards - FIU Description |
| Digital Inputs | |
| 0-45V with programmable high/low threshold on the whole voltage range, per group of 8 |
| ±100VDC and ±100VAC |
| > 100kOhms |
| Digital Outputs | |
| Single-ended outputs |
| 3.3V or 5.0V (LVTTL, TTL) |
| Short Circuit Protection Protection limit: ±50VDC and ±50VAC, for single or multiple faults |
| 32mA/ch, 800 mA total |
| 25 Ohms |
Dynamic Characteristics
| Maximum Frequency | >100Mb/s |
|---|---|
| Latency | <20ns |
| Timing Resolution | 12.5ns (for FPGA at 80MHz), 10ns (for FPGA at 100MHz) |
Environmental
The OP8910 is designed for indoor use only.
Module operating temperature | 0 °C to 85 °C |
|---|---|
Storage temperature | -40 °C to 85 °C |
Operating humidity | 10% to 90% non-condensing |
Storage humidity | 5% to 95% non-condensing |
Pollution Degree | 2 |
Maximum altitude | 2,000 m |
| Power requirement | 12W |