Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

The OP8E01 is a prototyping board that can be used with any OP8E00-compatible carrier. It can be used for a number of applications, including Hardware-in-the-loop (HIL) testing, rapid control prototyping, laboratory conditioning, and custom conditioning.


Three connectors are available on the OP8E01 allowing all connections possibility to build your own conditioning circuit.

P3 connector:

  • +12V power
  • Four differential signals (+/-). This connector carries the signals to/from the I/O mezzanine module of the real-time simulator.

P2 connector:

  • Up to four +/-18V power. These power lines are available only when used with the appropriate carrier (not available by default).

P4 connector:

  • Four differential signals (+/-). This connector carries the signals to/from the unit under test.

Board Layout

OP8E01 - Top View

OP8E01 - Bottom View

  • No labels