Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Disconnect simulator power
  • Remove the blank plate from desired
  • Insert desired mezzanine board on carrier board (optional, see changing mezzanines).
  • Gently slide the new board into the slot until the locking tab clicks into place and connector slides snugly into the connector on the midplane.
  • Reconnect power

...

Background Color
color#D3D3D3


 The system must be powered down before changing boards. Failure to do so may damage the equipment.


Anchor
changingmezz
changingmezz
Changing Mezzanines

The OP7220 is the carrier board on which the mezzanine conditioning boards are installed. Installation is simple and once the conditioning board is firmly pressed into place, the carrier board is ready to be installed in the OP7000.

...