Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Background Color
color#D3D3D3


 Boards  

Boards used in the back of the unit must correspond to the type of boards used in the front.

Example: if an Analog Outboard is used in front slot #1, then a matching Analog outboard must be used in the rear slot #1.


...

FRONT BOARDS

DESCRIPTION


REAR BOARDS

DESCRIPTION

ANALOG I/Os
OP7220

Universal Carrier with OP5330 or OP5340 mezzanine card.

Required for use of back analog IO cards







OP7811

OP7000_Rear_Interface_DB37 (Passthrough)

OP7818 - 2

OP7000 Rear Analog Input conditioning for OP5340, Voltage or Current mode, 16ch DB37 connectors

OP7819 - 2

OP7000 Rear Analog Output conditioning for OP5330, Voltage or Current mode, 16ch DB37 connectors

OP78E0

OP7000_6U_AIO_Carrier_DB37 for Type E Modules (Max of 4 modules per carrier)

DIGITAL I/Os

OP7353

Front Monitoring Interface


OP7816 - 2

OP7000 Rear Opto-Isolated Digital Input: 16-Din DB37 connector

OP7817 - 2

OP7000 Rear Opto-Isolated 16-Dout, Push-Pull 5V to 30V, DB37 connector

OP7161-2

Secondary V6 (240T) (slots 9, 11, 13 only). For distributed FPGA simulations

In most cases, the corresponding back IO card is driven by the Primary FPGA




OP7820

OP7000 Rear 8TX and 8RX DC to 50 MBd Fiber Optic link, 650nm

OP7821

OP7000_Rear_16Dout_SSR_250V_200mA (Normally Open Relay)

OP7822

OP7000_Back_6TX_6RX_Fiber_Optic_ link_820nm

OP7823

OP7000 Rear 16RX DC to 50 MBd Fiber Optic link, 650nm

OP7824

OP7000 Rear_16TX_DC_to_50_MBd_Fiber_ Optic_link_650nm

OP716X-1

Primary V6 (130T or 240T)



OP7832

OP7000 Rear Synchronization card (Between OP7000, OP5600, Wanda, …)

OP7461

Communication Interface PCIe 4X (match with 126-0347)

NOTE: For the OP7361, please see User Manuals of Former Products