Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Product name

OP7000V2 Simulator

FPGAXilinx Kintex-7 410T on one Primary board (OP7170-1, required) and up to eight Secondary boards (OP7170-2, optional)
Communication interfaces

One PCIe x4 interface

Four SFP sockets for 1-5 Gbps Aurora-based communication

MUlti-System Expansion (MuSE) link support

OP7000V2: Central mode supporting up to 4 remote units (default)

OP700V2-IO-REMOTE: Remote mode

I/O connectors

DB37 or optical transceivers, depending on the I/O cards installed. See the specifications for each board in section OP7000 IO Modules

Monitoring connectors

RJ45 on front modules

RJ45 and BNC on OP7000 front panel

Programming connectorJTAG micro-AB USB2
On-board memoryTwo 4Gb DDR3 SDRAM

Power supply

Universal input and active power factor correction 650W continuous power DC to DC converters for analog voltage

Dimensions (HxWxD)

26.67 x 48.26 x 41.5 cm (10.5” x 19” x 16.5“)

Weight

9 to 14 Kg, depending on the I/O and FPGA cards installed

Operating temperature

10 to 40 ºC (50 to 104ºF)

Storage temperature

-55 to 85ºC (-67 to 185ºF)

Relative humidity

10 to 90% non-condensing

Maximum altitude

2000 m (6562 ft.)

Special Notes


Background Color
color#D3D3D3


Software compatibility

  • The OP7000V2 can only be used with RT-LAB or HYPERSIM versions 2019.2 or above.
  • The OP7170 bitstream must be produced with RT-XSG 3.2.6 or above.