Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Introduction

The Analog Sensor card is used to provide to the ECU sixteen analog signals, simulating analog sensor outputs.  Each output signal can be adjusted within a voltage range specified by high/low reference voltages supplied to the card. 

Up to 10 ASM cards can be inserted in one OP6200 chassis, although the reference model typically uses a maximum of 3 cards.

The board also has the following capabilities :


The board  also supports the following features, which are common to all OP6200 I/O boards :

Children Display
pageCommon features

Architecture Overview