Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Excerpt Include
1.3 Updating the Circuit Model
1.3 Updating the Circuit Model
nopaneltrue


Circuit Model File Path: <Public Documents>\National Instruments\<NI VeriStand 20XX>\Examples\OPAL-RT\Power Electronics Add-On\Quad SCIM Constant Local Control\Circuit Model\SCIM_eHS_UB.mdl


Configuring the SCIM Model

In this example, the SCIM model has been pre-configured. For more information about machine configuration, please refer to the SCIM Section. Explore the machine configuration described below.

  • In the Configuration Tree, expand Circuit Model >> Machines and click SCIM 1 to open the configuration page for the machine.
  • Observe the configured machine parameters. The Input Mapping subsection allows the outputs of the circuit model to be easily connected to the inputs of the machine.
  • In the Configuration tree, expand SCIM 1 and click Mechanical Model to view the mechanical model parameters.
  • Confirm that the parameter values match those in the table below.


Motor Configuration
Motor TypeSquirrel-Cage Induction Machine
Stator Resistance (Ohm)0.5968

Stator Leakage Inductance (H)

0.00035
Rotor Resistance (Ohm)0.6258
Rotor Leakage Inductance (H)0.00547
Pole Pairs3
Initial Speed0
Mutual Inductance (H)0.0354
Zero-SequenceDon't Include
Solver Timestep (s)4.81E-7
Mechanical Model Configuration
Viscous Damping0.00190986
Static Friction0.3665
Inertia0.0167309
Mechanical Model Mode (VeriStand Channel)1