Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Connect one end of the RJ45 cable to the desired channels (A). See OP5705XG Pin Assignments for RJ45 connector pinouts
  • Connect the other end of the RJ45 cable to the monitoring connector (B)
  • Connect the mini BNC cable from the monitoring device to the mini BNC connectors (C) of the unit as shown in the figure above. These are labeled A, B, C, D, and each connector represents a channel.
  • Using the image as an example, the connectors represent channels in the following order; A = channel 28, B = channel 29, C = channel 30 D = channel 31.