- 16 single-ended analog output channels
- All outputs are sampled simultaneously, up to 1 MS/s
- 16-bit resolution
- ±16 V voltage range output
- ±15 mA maximum current per channel
- Factory calibrated
The OP4230-1 digital to analog converter (DAC) provides 16 single-ended digital output channels. Each channel uses a 16-bit resolution digital-to-analog converter.
Each OP4230-1 can sample up to 1 MS/s, giving a total throughput of 8 MS/s, all channels are simultaneously sampled. The onboard EEPROM provides offset and gain data adjustment written during the calibration process, as well as over-voltage protection.
By default, the maximum output signal is set to ±16 volts.
The figure below represents a simplified schematic of one channel of the OP4230-1 module.
It is composed of three stages: the first stage consists of one gain DAC and one offset DAC; the second stage consists of a signal DAC with an operational amplifier that allows for gain adjustments; the third stage consists of an operational amplifier that receives final signal value and integrates the offset.
The following diagrams provide an example of a typical application using the OP4230-1.
The OP4230-1 cassette includes the OP5330-3 mezzanine card.