Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »


OP78E0

Description

The standard analog modules, such as the OP5330 and OP5340, that get installed on the front Op7220 of the chassis are designed to operate in ±16V voltage mode. The back slot corresponding to the OP7220 slot can be used for extra analog signals conditioning with the help of the OP78E0 carrier board.

The OP78E0 carrier board is divided into four sections of four channels each for a total of sixteen channels. Each section can accommodate any OP7800 (Type-E) module .

The choice of modules is determined by the module type installed on the OP7220 on the front of the chassis, all four modules must have the same signal direction (input or output).

Analog Output Configuration

When used with an OP5330 analog output converter module, each section of four channels can receive a different analog out module:

Post Conditioning Configuration

Examples of available modules (see the full list in OP8E00 Conditioning Modules - General Information):

  • OP8E03, analog to current output
  • OP8E01, prototyping analog PCB
  • OP8E00, analog passthrough option when no conditioning is required

Analog Input Configuration

When used with an OP5340 analog input converter module, each section of four channels can receive a different analog input module:

Pre Conditioning Configuration

Examples of available modules (see the full list in OP8E00 Conditioning Modules - General Information):

  • OP8E02, current to analog input
  • OP8E04, high voltage input
  • OP8E01, prototyping analog PCB
  • OP8E00, analog passthrough option when no conditioning is required

Connector Pin Assignments

OP78E0/ModuleDB37FChannelsDB37FChannels
A



1+CH0020-CH00

Connector Pin Assignments

2+CH0121-CH01
3+CH0222-CH02
4+CH0323-CH03
B



5+CH0424-CH04
6+CH0525-CH05
7+CH0626-CH06
8+CH0727-CH07
C



9+CH0828-CH08
10+CH0929-CH09
11+CH1030-CH10
12+CH1131-CH11
D



13+CH1232-CH12
14+CH1333-CH13
15+CH1434-CH14
16+CH1535-CH15

Specifications

Product nameOP78E0
Part number126-0417
Product typeOP7000 back carrier board for OP8E00 (Type E) I/O conditioning modules 
Number of channelsUp to16, on four 4-channel modules
Operating voltageDependent on modules installed
Dimensions18.8 x 16.4 cm (7.4 in x 6.46 in)
I/O connectorOne DB37F
Operating temperature10 to 40 ºC (50 to 104ºF)
Storage temperature-55 to 85ºC (-67 to 185ºF)
Relative humidity10 to 90%, non-condensing
Maximum altitude2,000 m (6562 ft.)



  • No labels