Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

OP4200 General Specifications

Product name

OP4200

CPU

ARM Processor dual-core Cortex A9 1GHz

Memory

16 GB SD card, 1024 MB SRAM

O/S

Linux-based real-time operating system

FPGA

Xilinx Zynq XC7Z030, Kintex-7 FPGA, 125K LUT

I/O lines

128 lines, routed to cassette conditioning modules

Communication ports

2 GTX SFP connectors, up to 5Gbps

I/O connectors

DB37F RS232 CAN

I/O cassette slots

4 slots for I/O cassettes

Power supply

External Power supply, 100-240VAC, 50-60Hz, 60VA 24V ± 10% @ max 2.5A

Dimensions

25 x 22x 28 cm (9.8’’ x 8.7’’ x 11.2’’) HxWxD

Weight

4.54kg (10 lbs)

Operating temperature

10 to 35 ºC (50 to 95ºF)

Storage temperature

-55 to 85ºC (-67 to 185ºF)

Maximum rated ambient temperature

40Cº (104ºF)

Relative humidity

10 to 90% non-condensing

Maximum altitude

2000 m (6562 ft.)

OP4230-1 Specifications

Product Name

OP4230-1

Part Number

126-0157

Number of channels

16 single-ended

Resolution

16 bits

Default range

± 16 Volts

Maximum current

15 mA

Max. Sampling Frequency

1 MS/s

Min Conversion/Acquisition Time

1 μs per channel

DAC Type

8 x Dual DAC with 10 MBit/s Serial Output Transfer

DC Transfer Specifications

CMRR

100 dB

Dynamic Characteristics

Calibration

Programmable gain and offset calibration for each D/A. Calibration factors are stored in on-board non-volatile memory (EEPROM)

Maximum noise

20 mV peak-to-peak

Maximum offset

± 80 mV

Recommended warm-up time

5 min.

Calibration interval

as required

Dimensions

6.60 cm x 12.50 cm (2.6” x 4.92”)

I/O connector

80-pin high-speed header to carrier

Environmental

Operating temperature

10 to 40 °C

Storage temperature

-55 to 85 °C

Relative humidity

10 to 90%, non-condensing

Maximum altitude

2,000 m

OP4240-1 Specifications

Product Name:

OP4240-1

Number of channels:

OP4240-1: 16 differential

Resolution:

16 bits

Max. Sampling Frequency:

500 kS/s

Min Conversion / Acquisition Time:

2.5 μs per channel

ADC Type:

8 x Dual ADC with 10 MBit/s Serial Output Transfer

Nominal Input Ranges


Positive Full Scale

Negative Full Scale

+120.0

-120.0

+100.0

-100.0

+80.0

-80.0

+60.0

-60.0

+40.0

-40.0

+20.0 (hardware default value)

-20.0

Calibration

Calibration factors are stored in on-board non-volatile memory (flash memory). This memory is not accessible for calibration.

Recommended warm-up time:

5 min.

Calibration interval:

as required

Dimensions:

6.60 cm x 12.50 cm (2.6” x 4.92”)

I/O connector:

80-pin high-speed header to carrier

Environmental

Operating temperature

10 to 40 °C

Storage temperature

-55 to 85 °C

Relative humidity

10 to 90%, non condensing

Maximum altitude

2,000 m

OP4242-1 Specifications

Product name

OP4242 analog to digital converter (16 analog inputs - 2 MSPS)

Part number

429-0020

Number of channels

16

Resolution

16 bits

Input impedance

1 MΩ

Max. Sampling Frequency

2 MSPS

Min Conversion / Acquisition Time

510 nanoseconds per channel on OP4200

ADC Type

8 x Dual ADC

Input voltage range

± 20V

Bandwidth

Small signal (-3 dB): 400 kHz

Accuracy

±10mV on the entire ±20V range

System noise max.

5Vrms

Recommended warm-up time

5 min.

Dimensions

6.60 cm x 12.50 cm (2.6” x 4.92”)

Operating temperature

0 to 50 ºC (32 to 122ºF)

Storage temperature

-55 to 85ºC (-67 to 185ºF)

Relative humidity

10 to 90%, non-condensing

Maximum altitude

2,000 m (6562 ft.)

OP4250-1 Specifications

Product name

OP4250-1 (32 optoisolated digital inputs)

Number of channels

32 digital inputs

Isolation

Optical isolator

Connection mode

Anode and cathode available on the connector

Input current

3.6 mA, current limiting diode

Reverse voltage protection

Schottky diode

Maximum reverse voltage protection

30 Volts

Detection threshold

Separate Schmitt Trigger

Voltage range

4 to 50 Vdc

Delay Low-to-High

110 ns

Delay High-to-Low

60 ns

Rise/Fall times

6 ns/6 ns

Form factor

Mezzanine Type B

Dimensions

6.60 cm x 12.50 cm (2.6” x 4.92”)

I/O connector

80-pin high-speed header to the carrier (internal connection DB37F (external connection)

Operating temperature

10 to 40 ºC (50 to 104ºF)

Storage temperature

-55 to 85ºC (-67 to 185ºF)

Relative humidity

10 to 90%, non-condensing

Maximum altitude

2,000 m (6562 ft.)

OP4260-1 Specifications

Product name

OP4260-1 (32 digital outputs - push-pull)

Number of channels

32 digital outputs

2 banks of 16, fully isolated and independent of each other

Isolation

Galvanic isolator

Output Protection

50 mA resettable fuse

Protection thresholds

Overvoltage: 30V ±5%

Under-voltage protection 5V ±2.5% Reverse voltage: maximum 30 V.

Output Voltage range

5 to 30 Vdc max

Output configuration

Push-pull, tri-state output

Delay Low-to-High

£ 65ns @ 25°C for 30 V

£ 200ns @ 25°C for 5 V

Delay High-to-Low

£ 65ns @ 25°C for 30 V

£ 200ns @ 25°C for 5 V

Rise/Fall times

<= 15 ns

Form factor

Mezzanine Type B

Dimensions

6.60 cm x 12.50 cm (2.6” x 4.92”)

I/O connector

80-pin high-speed header to carrier

Operating temperature

10 to 40 ºC (50 to 104ºF)

Storage temperature

-55 to 85ºC (-67 to 185ºF)

Relative humidity

10 to 90%, non-condensing

Maximum altitude

2,000 m (6562 ft.)

  • No labels