Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

GENERAL

Product Name

32 Channels High-Range DIO

Part Numbers

OP5369

Board Type

Digital input/output conditioning

Form Factor

Mezzanine Type B

Dimensions

6.60 cm x 12.50 cm (2.6” x 4.92”)

Hot-Plug support

no

Characteristic

Number of Channels

32 IO in 4 Banks configurable as inputs or outputs

INPUT DIRECTION

Input Impedance

> 100 K Ohm

Reverse voltage protection

Signal diode

Maximum  voltage protection

+/- 50 Volts

Detection threshold

4 programmable Schmitt Trigger  Level step  .120 V+/- 5% 

 ( .1176V+/- ( 2%  +30mv) from .470v to 29.4 Threshold high and  Threshold Low for each bank

Recommended levels threshold
The default threshold are :  LOW level = 1.5V , the HIGH Level = 3.5V  . To improve the noise immunity,  a LOW level Threshold  of 1/3 Vuser , and a HIGH level Threshold  of 2/3 Vuser , are recommended.

Voltage Range

0 to 30 Vdc

Delay Low-to-High

10 ns                                                               

Delay High-to-Low

15 ns                                                                  

OUTPUT DIRECTION

Output Protection

50 mA resettable fuse

Output impedance2 to 15 ohm

Protection thresholds

Maximum Vuser + 0.5V

Minimum  -0.5V

Output voltage range

4.5 to 24Vdc Max ( default internal 4.5 volts)

Logic high levels ( typical) 

   Vuser <= 25v , noload  :  Vuser -0.2V       50mA  : Vuser -0.9V     ( in OP5650 system)  

   Vuser  >  25v , noload  :  Vuser -3.5V       50mA  : Vuser -4.7V     ( in OP5650 system)  

Logic Low levels ( typical)  Vuser  5V to 30V    0.1V   ( in OP5650 system)  

Output configuration

Push-pull 

Delay Low-to-high

< 100ns @25c for  25V

< 90ns @25c for 5 V                                      

Delay High-to-Low

< 100ns @25c for  25V

< 90ns @5c for 5 V                                       

Rise / Fall time ( x to Y)

< 20 ns , 15 ns @ 5V

< 40ns,   50ns @ 30V                                                   

Minimum Pulse detection (resolution)

90 ns      5V

130ns  30V

 output Frequency

 DC to 8 Mbit (1)

Environmental


 

The OP5369 is designed for indoor use only.


Module operating temperature

0 °C to 40 °C

Storage temperature

-40 °C to 85 °C

Operating humidity

10% to 90% non-condensing

Storage humidity

5% to 95% non-condensing

Pollution Degree

2

Maximum altitude

2,000 m

Power requirement15W

Maximum Number of Repetitive Signals


in OP5650 or OP5x07in OP4510
Vuser / Channel

<=30V

<=12V<=5V<=30V<=12V<=5V
1 1 Mb/s2 Mb/s5 Mb/s16Kb/s*2 Mb/s5 Mb/s
5  1Mb/s2 Mb/s5 Mb/s16Kb/s*1 Mb/s4 Mb/s
15500Kb/s2 Mb/s5 Mb/s16Kb/s**500 Kb/s2 Mb/s
32500Kb/s1 Mb/s4 Mb/s16Kb/s**500 Kb/s1 Mb/s
**500 Kb/s  si T amb < 25C*1 Mb/s si T amb < 25C

 ,,,

  • No labels