Use the PWM Generators to generate pulse width modulated signals on the FPGA. These signals can be mapped directly toDigital Outputchannels or circuit modelSwitches.
PWM Generators Section Channels
In theSystem Explorerwindow configuration tree, expand thePower Electronics Add-Oncustom device, then Circuit Model >> PWM Generators to display the following subsections and custom device channels. Assign values to the channels to configure the PWM Generators.
PWM Generator X
Active Dead Time
Time during which both the PWM signal and its complementary are held in an inactive state, immediately before the PWM signal goes active.
Fraction of one period for which the PWM signal is active, as a percentage
Frequency of the generated PWM signal.
Inactive Dead Time
Time during which both the PWM signal and its complementary are held in an inactive state, immediately before the complementary signal goes active.