Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Next, we will route a signal to each switch in the circuit model. For more information about the circuit model switches, please refer to the Switches section.

  • In the Configuration Tree, expand Circuit Model >> Switches. Note that a VeriStand channel has been created for each Switch component in the circuit model.
  • Click the Switches section to open the configuration page.
  • Confirm that the switch mappings are configured as shown in the image below.
  • Click Save.

The outputs of three SPWM Generators (SPWM00, SPWM01, SPWM02) and their complementary signals are mapped to the six inverter Switches of the circuit model (SW01-06).

  • No labels