Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Next, we will route a signal to each source in the circuit model. For more information about the circuit model sources, please refer to the Sources section.

  • In the Configuration Tree, expand Circuit Model >> Sources. Note that a VeriStand channel has been created for each Source component in the circuit model.
  • Click the Sources section to open the configuration page.
  • Confirm that the source mappings are configured as shown in the image below.
  • Click Save.


The outputs of three Sinewave Generators (SWG00, SWG01, SWG02) are mapped to the AC Sources of the circuit model (U01, U02, U03), while the Current Phase A and Current Phase B outputs of the PMSM model are mapped to Sources U04 and U05.


  • No labels