Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

To run a simulation, the VeriStand project must be configured to point to the real time controller.  Please see the Hardware Requirements and Deployment Target Software Requirements for a list of supported real time controllers and operating systems.

  • Click the Configure.. button to open the VeriStand System Explorer
  • Click the Controller item in the System Definition tree to open the configuration menu
  • Under Target Specification, input the IP address of the real time target to be used to run the real-time simulation
  • Ensure that either PharLap or Linux x64 is selected as the Operating System (depending on the operating system of the real time controller)

  • No labels