Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

This guide provides and overview of the Two Level Inverter Example included in the OPAL-RT Power Electronics Add-On for NI VeriStand.  We will discuss deploying, running, and monitoring the simulation in real-time. 

The model used in this example was created using the Simscape Electrical Specialized Power Systems Simulink Blockset (see below). It represents a two-level inverter. In this example, we will send a constant voltage U01 to the battery block and gating signals to the universal bridge block SW01-06 using the on-board SPWM generators. The inverter voltages and currents (i.e measurements), Y01-Y06 and Y07, will be displayed in the user interface.


The tutorial has been split up into the following sections:

  • No labels