Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Next, we will route a signal to each switch in the circuit model. For more information about the circuit model switches, please refer to the Switches section.

  • In the Configuration Tree, expand Circuit Model >> Switches. Note that a VeriStand channel has been created for each Switch component in the circuit model.
  • Click the Switches section to open the configuration page.
  • Confirm that the switch mappings are configured as shown in the image below.
  • Click Save.

The outputs of three SPWM Generators (SPWM00, SPWM01, SPWM02) and their complementary signals are mapped to the six inverter Switches of the circuit model (SW01-06).



  • No labels