Pour la documentation en FRANÇAIS, utilisez l’outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Next, we will route a signal to each source in the circuit model. For more information about the circuit model sources, please refer to the Sources section.

  • In the Configuration Tree, expand Circuit Model >> Sources. Note that a VeriStand channel has been created for each Source component in the circuit model.
  • Click the Sources section to open the configuration page.
  • Confirm that the source mappings are configured as shown in the image below.
  • Click Save.

The outputs of three Sine Wave Generators (SWG00, SWG01, SWG02) are mapped to the AC Sources of the circuit model (U01, U02, U03), while the Current Phase A and Current Phase B outputs of the PMSM model are mapped to Sources U04 and U05.

  • No labels