OP4200 General Specifications

Product name

OP4200

CPU

ARM Processor dual-core Cortex A9 1GHz

Memory

16 GB SD card, 1024 MB SRAM

O/S

Linux-based real-time operating system

FPGA

Xilinx Zynq XC7Z030, Kintex-7 FPGA, 125K LUT

I/O lines

128 lines, routed to cassette conditioning modules

Communication ports

2 GTX SFP connectors, up to 5Gbps

I/O connectors

DB37F RS232 CAN

I/O cassette slots

4 slots for I/O cassettes

Power supply

External Power supply, 100-240VAC, 50-60Hz, 60VA 24V ± 10% @ max 2.5A

Dimensions

25 x 22x 28 cm (9.8’’ x 8.7’’ x 11.2’’) HxWxD

Weight

4.54kg (10 lbs)

Operating temperature

10 to 35 ºC (50 to 95ºF)

Storage temperature

-55 to 85ºC (-67 to 185ºF)

Maximum rated ambient temperature

40Cº (104ºF)

Relative humidity

10 to 90% non-condensing

Maximum altitude

2000 m (6562 ft.)

OP4230-1 Specifications

Product Name

OP4230-1

Part Number

429-0019

Number of channels

16 single-ended

Resolution

16 bits

Default range

± 16 Volts

Maximum current

15 mA

Max. Sampling Frequency

1 MS/s

Min Conversion/Acquisition Time

1 μs per channel

Dynamic Characteristics

Calibration

Programmable gain and offset calibration for each D/A. Calibration factors are stored in on-board non-volatile memory (EEPROM)

Maximum noise

20 mV peak-to-peak

Maximum offset

± 10 mV

Recommended warm-up time

5 min.

Calibration interval

as required

Dimensions

6.60 cm x 12.50 cm (2.6” x 4.92”)

Environmental

Operating temperature

10 to 40 °C

Storage temperature

-55 to 85 °C

Relative humidity

10 to 90%, non-condensing

Maximum altitude

2,000 m

OP4240-1 Specifications

Product Name:

OP4240-1

Part Number429-0018

Number of channels:

16 differential

Resolution:

16 bits

Max. Sampling Frequency:

400 kS/s

Min Conversion / Acquisition Time:

2.5 μs per channel

ADC Type:

8 x Dual ADC

Nominal Input Ranges

Full Scale

+/- 20.0 V

Calibration

Calibration factors are stored in on-board non-volatile memory (flash memory). This memory is not accessible for calibration.

Recommended warm-up time:

5 min.

Calibration interval:

as required

Dimensions:

6.60 cm x 12.50 cm (2.6” x 4.92”)

Environmental

Operating temperature

10 to 40 °C

Storage temperature

-55 to 85 °C

Relative humidity

10 to 90%, non condensing

Maximum altitude

2,000 m

OP4242-1 Specifications

Product name

OP4242 analog to digital converter (16 analog inputs - 2 MSPS)

Part number

429-0020

Number of channels

16

Resolution

16 bits

Input impedance

1 MΩ

Max. Sampling Frequency

2 MSPS

ADC Type

8 x Dual ADC

Input voltage range

± 20V

Bandwidth

Small signal (-3 dB): 400 kHz

Accuracy

±10mV on the entire ±20V range

System noise max.

5mVrms

Recommended warm-up time

5 min.

Dimensions

6.60 cm x 12.50 cm (2.6” x 4.92”)

Operating temperature

0 to 50 ºC (32 to 122ºF)

Storage temperature

-55 to 85ºC (-67 to 185ºF)

Relative humidity

10 to 90%, non-condensing

Maximum altitude

2,000 m (6562 ft.)

OP4250-1 Specifications

Product name

OP4250-1 (32 optoisolated digital inputs)

Number of channels

32 digital inputs

Isolation

Optical isolator

Connection mode

Anode and cathode available on the connector

Input current

3.6 mA, current limiting diode

Reverse voltage protection

Schottky diode

Maximum reverse voltage protection

30 Volts

Detection threshold

Separate Schmitt Trigger

Voltage range

4 to 30 Vdc

Delay Low-to-High

<= 160 ns

Delay High-to-Low

<= 130 ns

Dimensions

6.60 cm x 12.50 cm (2.6” x 4.92”)

Operating temperature

10 to 40 ºC (50 to 104ºF)

Storage temperature

-55 to 85ºC (-67 to 185ºF)

Relative humidity

10 to 90%, non-condensing

Maximum altitude

2,000 m (6562 ft.)

OP4260-1 Specifications

Product name

OP4260-1 (32 digital outputs - push-pull)

Number of channels

32 digital outputs

2 banks of 16, fully isolated and independent of each other

Isolation

Galvanic isolator

Output Protection

50 mA resettable fuse

Protection thresholds

Overvoltage: 30V ±5%

Under-voltage protection 5V ±2.5% Reverse voltage: maximum 30 V.

Output Voltage range

5 to 30 Vdc max

Output configuration

Push-pull, tri-state output

Delay Low-to-High

<= 90ns @ 25°C for 30 V

<= 200ns @ 25°C for 5 V

Delay High-to-Low

<= 90ns @ 25°C for 30 V

<= 200ns @ 25°C for 5 V

Rise/Fall times

<= 15 ns

Dimensions

6.60 cm x 12.50 cm (2.6” x 4.92”)

Operating temperature

10 to 40 ºC (50 to 104ºF)

Storage temperature

-55 to 85ºC (-67 to 185ºF)

Relative humidity

10 to 90%, non-condensing

Maximum altitude

2,000 m (6562 ft.)