Circuit Model File Path: <Public Documents>\National Instruments\<NI VeriStand 20XX>\Examples\OPAL-RT\Power Electronics Add-On\Dual PMSM SH Local Control\Circuit Model\PMSM_eHS_UB.mdl

Configuring the PMSM Model

In this example, the PMSM model and associated sensors have been pre-configured. For more information related to machine configuration, please refer to the PMSM SH Section. Explore the configuration of the machine by following the steps below.

• In the Configuration Tree, expand Circuit Model >> Machines and click PMSM SH 1 to open the configuration page for the machine.
• Observe the configured machine parameters. The Input Mapping subsection allows the outputs of the circuit model to be easily connected to the inputs of the machine.
  • If using VeriStand 2019 or above, the Model File path must be updated to the one shown in the table below, where 20xx represents your VeriStand version.
• In the Configuration tree, expand PMSM SH 1 and click Mechanical Model to view the mechanical model parameters.
• Confirm that the parameter values match those in the table below.